dmesg - 16384 MB RAM
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-327.36.3.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-4) (GCC) ) #1 SMP Mon Oct 24 16:09:20 UTC 2016
Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-327.36.3.el7.x86_64 root=/dev/vda1 ro crashkernel=auto rhgb quiet console=ttyS0 console=tty0 net.ifnames=0 biosdevname=0 intel.idle.max_cstate=0 video=800x600
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable
BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfffcfff] usable
BIOS-e820: [mem 0x00000000dfffd000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Red Hat KVM, BIOS 0.5.1 01/01/2007
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x420000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000E0000000 mask 3FFFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xdfffd max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd9d0-0x000fd9df] mapped at [ffff8800000fd9d0]
Base memory trampoline at [ffff880000095000] 95000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01f36000, 0x01f36fff] PGTABLE
BRK [0x01f37000, 0x01f37fff] PGTABLE
BRK [0x01f38000, 0x01f38fff] PGTABLE
init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
[mem 0x41fe00000-0x41fffffff] page 2M
BRK [0x01f39000, 0x01f39fff] PGTABLE
init_memory_mapping: [mem 0x41c000000-0x41fdfffff]
[mem 0x41c000000-0x41fdfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41bffffff]
[mem 0x400000000-0x41bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdfffcfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xdfdfffff] page 2M
[mem 0xdfe00000-0xdfffcfff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x3490d000-0x3647efff]
ACPI: RSDP 00000000000fd980 00014 (v00 BOCHS )
ACPI: RSDT 00000000dfffd2e0 00030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 00000000dffffce0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 00000000dfffd780 024FD (v01 BXPC BXDSDT 00000001 INTL 20090123)
ACPI: FACS 00000000dffffc80 00040
ACPI: SSDT 00000000dfffd430 00345 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 00000000dfffd310 000B0 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
Initmem setup node 0 [mem 0x00000000-0x41fffffff]
NODE_DATA [mem 0x41ffd7000-0x41fffdfff]
Reserving 161MB of memory at 672MB for crashkernel (System RAM: 16383MB)
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 4:1ff87001, primary cpu clock
kvm-clock: using sched offset of 9927181066 cycles
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f600000-ffff88041f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009afff]
node 0: [mem 0x00100000-0xdfffcfff]
node 0: [mem 0x100000000-0x41fffffff]
On node 0 totalpages: 4194199
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3994 pages, LIFO batch:0
DMA32 zone: 14272 pages used for memmap
DMA32 zone: 913405 pages, LIFO batch:31
Normal zone: 51200 pages used for memmap
Normal zone: 3276800 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdfffd000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff]
PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88041fc00000 s95424 r8192 d31552 u262144
pcpu-alloc: s95424 r8192 d31552 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
KVM setup async PF for cpu 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128642
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-327.36.3.el7.x86_64 root=/dev/vda1 ro crashkernel=auto rhgb quiet console=ttyS0 console=tty0 net.ifnames=0 biosdevname=0 intel.idle.max_cstate=0 video=800x600
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Memory: 16238152k/17301504k available (6444k kernel code, 524708k absent, 538644k reserved, 4265k data, 1632k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:327936 nr_irqs:488 0
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Detected 2693.678 MHz processor
Calibrating delay loop (skipped) preset value.. 5387.35 BogoMIPS (lpj=2693678)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
mce: CPU supports 10 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: -1
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 24610 entries in 97 pages
Enabling x2apic
Enabled x2apic
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel Ksyun Virtual Senior CPU(ksyun-cpu64-senior) (fam: 06, model: 16, stepping: 03)
Performance Events: unsupported p6 CPU model 22 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
kvm-clock: cpu 1, msr 4:1ff87041, secondary cpu clock
KVM setup async PF for cpu 1
kvm-clock: cpu 2, msr 4:1ff87081, secondary cpu clock
KVM setup async PF for cpu 2
kvm-clock: cpu 3, msr 4:1ff870c1, secondary cpu clock
KVM setup async PF for cpu 3
kvm-clock: cpu 4, msr 4:1ff87101, secondary cpu clock
KVM setup async PF for cpu 4
kvm-clock: cpu 5, msr 4:1ff87141, secondary cpu clock
KVM setup async PF for cpu 5
kvm-clock: cpu 6, msr 4:1ff87181, secondary cpu clock
KVM setup async PF for cpu 6
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
kvm-clock: cpu 7, msr 4:1ff871c1, secondary cpu clock
Brought up 8 CPUs
smpboot: Total of 8 processors activated (43098.84 BogoMIPS)
KVM setup async PF for cpu 7
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
atomic64 test passed for x86-64 platform with CX8 and with SSE
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130517/hwxface-571)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffffffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc000-0xc00f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io 0xc020-0xc03f]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: reg 0x14: [mem 0xf2000000-0xf2000fff]
pci 0000:00:02.0: reg 0x30: [mem 0xf2010000-0xf201ffff pref]
pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [io 0xc040-0xc07f]
pci 0000:00:03.0: reg 0x14: [mem 0xf2020000-0xf2020fff]
pci 0000:00:03.0: reg 0x30: [mem 0xf2030000-0xf203ffff pref]
pci 0000:00:04.0: [1af4:1003] type 00 class 0x078000
pci 0000:00:04.0: reg 0x10: [io 0xc080-0xc09f]
pci 0000:00:04.0: reg 0x14: [mem 0xf2040000-0xf2040fff]
pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
pci 0000:00:05.0: reg 0x10: [io 0xc0c0-0xc0ff]
pci 0000:00:05.0: reg 0x14: [mem 0xf2041000-0xf2041fff]
pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000
pci 0000:00:06.0: reg 0x10: [io 0xc100-0xc13f]
pci 0000:00:06.0: reg 0x14: [mem 0xf2042000-0xf2042fff]
pci 0000:00:07.0: [1af4:1002] type 00 class 0x050000
pci 0000:00:07.0: reg 0x10: [io 0xc140-0xc15f]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0, disabled.
ACPI: Enabled 16 GPEs in block 00 to 0F
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfffd000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0x3fffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 28104k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbffd000-0xdfffd000] (64MB) mapped at [ffff8800dbffd000-ffff8800dfffcfff]
microcode: CPU0 sig=0x10663, pf=0x1, revision=0x1
microcode: CPU1 sig=0x10663, pf=0x1, revision=0x1
microcode: CPU2 sig=0x10663, pf=0x1, revision=0x1
microcode: CPU3 sig=0x10663, pf=0x1, revision=0x1
microcode: CPU4 sig=0x10663, pf=0x1, revision=0x1
microcode: CPU5 sig=0x10663, pf=0x1, revision=0x1
microcode: CPU6 sig=0x10663, pf=0x1, revision=0x1
microcode: CPU7 sig=0x10663, pf=0x1, revision=0x1
microcode: Microcode Update Driver: v2.00 , Peter Oruba
sha1_ssse3: Using AVX2 optimized SHA-1 implementation
sha256_ssse3: Using AVX2 optimized SHA-256 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1516347157.618:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31770
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 22
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: detected 2 ports
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-327.36.3.el7.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one day, 114 bytes nvram
cpuidle: using governor menu
ioremap error for 0xdffff000-0xe0000000, requested 0x10, got 0x0
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: dd8ac3defea607a613c95835d0371940e77543cf'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:00: setting system clock to 2018-01-19 07:32:37 UTC (1516347157)
Freeing unused kernel memory: 1632k freed
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization kvm.
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
virtio-pci 0000:00:05.0: virtio_pci: leaving for legacy driver
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.13
FDC 0 is a S82078B
[drm] Initialized drm 1.1.0 20060810
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 25 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X
virtio-pci 0000:00:05.0: irq 27 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 28 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 29 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 30 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 31 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 32 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 33 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 34 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 35 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 36 for MSI/MSI-X
vda: vda1
virtio-pci 0000:00:06.0: irq 37 for MSI/MSI-X
virtio-pci 0000:00:06.0: irq 38 for MSI/MSI-X
[TTM] Zone kernel: Available graphics memory: 8133958 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] fb mappable at 0xF0000000
[drm] vram aper at 0xF0000000
[drm] size 33554432
[drm] fb depth is 24
[drm] pitch is 2400
vdb: unknown partition table
fbcon: cirrusdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 100x37
cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device
cirrus 0000:00:02.0: registered panic notifier
[drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1: new full-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=0627, idProduct=0001
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
usb 1-1: Product: QEMU USB Tablet
usb 1-1: Manufacturer: QEMU
usb 1-1: SerialNumber: 42
input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
systemd-journald[138]: Received SIGTERM from PID 1 (systemd).
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1516347158.107:2): selinux=0 auid=4294967295 ses=4294967295
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
EXT4-fs (vda1): re-mounted. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd-journald[410]: Received request to flush runtime journal from PID 1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
tsc: Refined TSC clocksource calibration: 2693.678 MHz
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
input: PC Speaker as /devices/platform/pcspkr/input/input4
ppdev: user-space parallel port driver
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
type=1305 audit(1516347158.576:3): audit_pid=667 old=0 auid=4294967295 ses=4294967295 res=1
Adjusting kvm-clock more than 11% (9437184 vs 9311354)
ip_local_port_range: prefer different parity for start/end values.